Many users complained that their external hard drives are connected but not showing on computer or File Explorer the Windows 10/8/7. Some reported that the USB or external hard drive is not showing up on My Computer or File Explorer but showing in Disk Management. Others said that external hard drive shows in device manager but not disk management. To fix these external hard drive issues, this troubleshooting post will be helpful for you.
Many users complained that their external hard drives are connected but not showing on computer or File Explorer the Windows 10/8/7. Some reported that the USB or external hard drive is not showing up on My Computer or File Explorer but showing in Disk Management. Others said that external hard drive shows in device manager but not disk management. The issue of external hard disk Not detected can be fixed using the above-mentioned methods, solve the Seagate external hard drive not showing up problems. On the fixing process, all your data can be get lost or deleted.
Case 1: External hard drive shows up in disk management but not file explorer
You may experience that your USB or external drive has been connected to the computer, but it is not showing in File Explorer or My Computer, but shows in Disk Management instead. Under this situation, it will be regarded as an unknown disk and shows the capacity to be 2048 GB in the Disk Management. To fix the problem, please try following methods.
Tip: If your external hard drive shows in device manager but not disk management, you can directly move to the case 2.
1. Assign a Drive Letter to the USB/Hard Drive
Sometimes, the drive might not have been assigned a drive letter by Windows so that USB or external hard drive cannot show on File Explorer but in Disk Management. In this case, you can try to assign a drive letter to the USB or external hard drive in Disk Management.
STEP 1. Navigate to 'Control Panel'> 'System and Security'> 'Administrative Tools'.
STEP 2. Choose 'Computer Management'. Provide an administrative passcode, if asked.
STEP 3. In Disk Management, find out the unlabeled hard drive and right-click on it to choose 'Change drive letter and paths..'
STEP 4. Click 'Add'> 'OK' to pick out the available drive letter.
STEP 5. If the drive letter does not show on the drive, check if the drive is offline. If it is, right-click the disk number and select Online. And then, follow the instructions again.
NOTE:
If you can't finish the operation in Disk Management, you are able to run 'cmd' to change or assign the drive letter.
Open Command Prompt. (CMD) and type 'diskpart'.
At the DISKPART prompt, enter 'list volume'. ( mark down the number of the simple volume whose drive letter you want to assign)
Source code editor for windows. At the DISKPART prompt, enter 'select volume n[volume's number]' (Select the volume whose drive letter you want to assign)
At the DISKPART prompt, enter 'assign letter=N' (N stands for the drive letter you want to assign)
2. Make sure that the hard drive is enabled and online
Make sure the hard drive is enabled
If the drive has been disabled, the disk will be invisible in File Explorer. When the disk is disabled, follow the steps below to Enable it:
STEP 1. Press 'Windows'+ 'R' on the keyboard to activate run box.
STEP 2. Type 'devmgmt.msc' on the run box to open 'Device Manager'.
STEP 3. If a drive is disabled, the disk drive will be marked with a down arrow. Locate the hard drive you want to enable.
STEP 4. Right-click on it and choose 'Properties'> 'View'tab.
STEP 5. Click on 'Enable Device' button > 'OK'.
STEP 6. After that, check if the down arrow is still there.
Make sure that the drive is online
Sometimes, an external hard drive connected but not showing because the drive is offline. To be detected by Windows, you can follow steps below to check the current status of the disk.
Go to 'Control Panel'> 'System and Security'> 'Administrative Tools'.
Choose 'Computer Management', and locate your disk in 'Disk Management'.
Right-click on it and select 'Online'.
3. Update drivers for USB or external hard drive
When your USB/external drive does not show on file explorer on Windows 10/8/7, you can try to update its driver in Device Manager. As we know, an update is created to fix some glitches for the previous version so as to make USB or external drive showing on My computer again.
STEP 1. Press 'Windows'key + 'R'and enter 'devmgmt.msc' on the run box.
STEP 2. Open 'Device Manager'> Click the 'Scan for hardware changes' icon on the menu.
STEP 3. Right-click on the inaccessible USB/external hard drive and choose 'Update Driver Software..'.
STEP 4. After the update is finished, restart your PC and check if the device is accessible.
4. Recover data from hard drive that is not showing
When external hard drive issue occurs, an external hard drive is not showing files though they still exist. If any important data is in the USB/external hard drive when external hard drive shows up in Disk Management but not File Explorer, you can employ data recovery to retrieve your data before formatting it. Here we highly recommend you FonePaw Data Recovery which is capable of recovering data from USB/ external hard drive, supporting Window 10/8/7. To recover data from hard drive, you just need few simple steps.
Download
STEP 1. Run FonePaw Data Recovery, and then, select the file types you need.
STEP 2. Next, click on 'Scan' button after selecting your USB/external drive.
STEP 3. Select out the files you want to recover.
STEP 4. Adobe premiere plan. Finally, click on 'Recover' button to finish data recovery.
STEP 5. After that, you can keep on formatting your inaccessible USB/external hard drive.
Case 2: External hard drive shows up in Device Manager but not Disk Management or File Explorer
Unlike case 1, USB or external hard drive sometimes is invisible in File Explorer or Disk Management, but it can be detected in Device Manager, for example, an external HDD won't show up in explorer, but it shows in Device Manager. To fix the issue, several methods can be listed below.
1. Make sure the USB or external hard drive is available. If it is not showing up in Disk Management or File Explorer, you can try to plug it into other USB port of your computer. What's more, you can connect your external drive to other computers to check if it works.
2. Partition and format the external hard drive.
Go to 'Computer Management'. > Right-click on black bar of the invisible drive to choose 'New Partition..'> Follow the instruction to finish the Partition.
Right-click on the drive and select 'Format'.
3. Disable and re-enable the USB controller.
Seagate Hard Drive Not Recognized
Navigate to 'Device Manager'. > Find 'Unknown USB Device' and right-click on it. > Choose 'Uninstall'.
After restarting your PC, enable the USB controller again.
Now, your issue - external hard drive not showing Windows 10/8/7 has been resolved. To manage the data on USB/external hard drive, read here:
Fix External Hard Drive not Showing in Disk Management. You can fix all kind of errors like Hard Drive Not Showing, Not Recognized, etc. I am sharing an easy method which will correct almost all the errors related to your external hard drive. You can resolve all these issues in any of your Windows 10, 8.1, and 8. I will share 5 simple steps to fix external hard drive, not showing in windows 10.
When you connect an external hard drive on your Windows PC/Laptop, then it does not show up in the disk management application? Well, don't worry because I have a simple solution to fix the external hard drive, not showing in disk management on Windows PC/Laptop.
However, if you were looking for the simple and straightforward method to do this then surely this article is for you. Just go through the entire article for every detail regarding the same.
Read more: How to Fix Printer Problems
Contents
External Hard Drive Powers Up But Not Recognized As A
External Hard Drive Not Recognized in Windows
To fix the external hard drive not showing in disk management on our Windows PC/Laptop issue we will not be using any software on our Windows system. Setting this issue is a straightforward method; what exactly we are going to do is that we will use system settings only.
However, we all know that system's problem can be easily solved by using system settings. So, this is the motive of our method. Moreover, Windows gives full support to its user that let they customize any settings as they want so we are going to mess with system settings of our Windows PC/Laptop.
Read more: How to Fix Error 651
How to Fix External Hard Drive Not Showing in Disk Management in Windows 10, 8.1 & 8
If you are having Windows 10, 8.1 or 8 PC/Laptop or either computer and having this issue, then this article will be helpful for you. I think now you have some idea that we will fix external hard drive not showing in disk management using Windows system settings.
There is no such hidden or inbuilt feature to do so. Even this is more simple than the method to use a hidden feature of Windows PC. Well, without taking your much precious time, I would like to get started with our quick guide, which is described below.
Fix External Hard Drive Not Showing in Disk Management
- Visit the Device Manager application & by using properties page, uninstall your external hard drive.
- Now, remove your external hard drive from your Windows system.
- Then, by choosing Restore option from Control Panel > Restore your Windows PC or Laptop.
- Now, after doing this, re-connect your hard drive to the computer.
- Then, open the Disk management app, and you will be able to see your external hard drive in it.
Further, you have to create a partition of that external hard drive to use it. That's it Nothing else.
Read more: How to Fix Windows 10 Crashes Problem
Now, your issue - external hard drive not showing Windows 10/8/7 has been resolved. To manage the data on USB/external hard drive, read here:
Fix External Hard Drive not Showing in Disk Management. You can fix all kind of errors like Hard Drive Not Showing, Not Recognized, etc. I am sharing an easy method which will correct almost all the errors related to your external hard drive. You can resolve all these issues in any of your Windows 10, 8.1, and 8. I will share 5 simple steps to fix external hard drive, not showing in windows 10.
When you connect an external hard drive on your Windows PC/Laptop, then it does not show up in the disk management application? Well, don't worry because I have a simple solution to fix the external hard drive, not showing in disk management on Windows PC/Laptop.
However, if you were looking for the simple and straightforward method to do this then surely this article is for you. Just go through the entire article for every detail regarding the same.
Read more: How to Fix Printer Problems
Contents
External Hard Drive Powers Up But Not Recognized As A
External Hard Drive Not Recognized in Windows
To fix the external hard drive not showing in disk management on our Windows PC/Laptop issue we will not be using any software on our Windows system. Setting this issue is a straightforward method; what exactly we are going to do is that we will use system settings only.
However, we all know that system's problem can be easily solved by using system settings. So, this is the motive of our method. Moreover, Windows gives full support to its user that let they customize any settings as they want so we are going to mess with system settings of our Windows PC/Laptop.
Read more: How to Fix Error 651
How to Fix External Hard Drive Not Showing in Disk Management in Windows 10, 8.1 & 8
If you are having Windows 10, 8.1 or 8 PC/Laptop or either computer and having this issue, then this article will be helpful for you. I think now you have some idea that we will fix external hard drive not showing in disk management using Windows system settings.
There is no such hidden or inbuilt feature to do so. Even this is more simple than the method to use a hidden feature of Windows PC. Well, without taking your much precious time, I would like to get started with our quick guide, which is described below.
Fix External Hard Drive Not Showing in Disk Management
- Visit the Device Manager application & by using properties page, uninstall your external hard drive.
- Now, remove your external hard drive from your Windows system.
- Then, by choosing Restore option from Control Panel > Restore your Windows PC or Laptop.
- Now, after doing this, re-connect your hard drive to the computer.
- Then, open the Disk management app, and you will be able to see your external hard drive in it.
Further, you have to create a partition of that external hard drive to use it. That's it Nothing else.
Read more: How to Fix Windows 10 Crashes Problem
Conclusion
We just saw a fantastic and simple method to fix the external hard drive, not showing in disk management on your Windows PC/Laptops. However, it is not sure that using this guide you will get a 100% success rate to fix it. But, if this doesn't work. Xbox one ssd.
Then I will suggest you to use BIOS settings to do so. Well, using this method will work for you I'm sure. So, use it freely. Also, make sure that you share this article with your friends though they will be able to fix this issue without any technician or mechanic.
